1,2-ペンタンジオール

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1  Product Identifiers

Product Name: Arocos-SA natural

CAS Number: 69-72-7

EINECS Number: 200-712-3

1.2  Other means of identification

Other names: Salicylic acid; 2-hydroxybenzoic acid

1.3  Recommended use of the chemical and restriction on use

Identified uses

Cosmetic ingredient

Uses advised against

no data available

1.4  Details of the supplier of the safety data sheet

Company:Aromaholly Chemical (Jining) Co.,Ltd

No.1 Northern Central Road, Jining New Material Industry Park, Jinxiang 272211,

China

Telephoner: 0086-0537-8921999

E-mail:[email protected]

1.5  Emergency telephone number

Telephoner: 0086-0537-8921999

SECTION 2: Hazards identification

2.1  Classification of the substance or mixture

Serious eye irritation:

Category 2

2.2  GHS label elements, including precautionary statements

Pictogram(s)  Signal word

Danger

Hazard statement(s)

GHS08: health hazard

GHS07: exclamation mark

GHS05: corrosion

Precautionary statement(s)

Prevention

P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/..

P201: Obtain special instructions before use.

P308+P313: IF exposed or concerned: Get medical advice/attention.

P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing.

P337+P313: If eye irritation persists: Get medical advice/attention.

P501: Dispose of contents/container to …

2.3  Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

SECTION 4: First-aid measures

4.1  Description of necessary first aid measures

General advice:

First-aider must protect himself. Place affected clothing in a sealed bag for subsequent decontamination.

If inhaled:  Move to fresh air. Consult a physician after significant exposure.

In case of skin contact:  Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water.

In case of eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical

advise/attention.

If ingestion

Do NOT induce vomiting. Do not give anything to drink.

4.2  Most important symptoms/effects, acute and delayed

no data available

4.3  Indication of immediate medical attention and special treatment needed, if necessary

no data available

SECTION 5: Firefighting measures

Flammable properties

Flash point

157 °C at 101 325 Pa

Ignition temperature

no data available

5.1  Suitable extinguishing media

Water spray. Foam. Powder.

5.2  Extinguishing media which shall not be used for safety reasons

None known. Use extinguishing measures that are appropraite to local circumstances and the surrounding

environment.

5.3  Specific hazards during firefighting

Risks of dust explosion.

5.4  Special protective equipment for firefighters

Special protective equipment for fire-fighters. Self contained breathing apparatus (EN 133).

5.5  Further information: In the event of fire and/or explosion do not breathe fumes

Cool containers / tanks with water spray.

SECTION 6: Accidental release measures

6.1  Personal precautions, protective equipment and emergency procedures

Avoid contact with the skin and the eyes. Do not breathe dust. For further information refer to section “Exposure

controls / personal protection”. Wear proof-boots. Mark the contaminated with signs and prevent access to

unauthorized personnel. Signal word. Stop leaking if safe to do so.

6.2  Environmental precautions

Do not allow uncontrolled discharge of product into the environment.

6.3  Methods and materials for containment and cleaning up

Recovery: Keep in suitable, closed containers for disposal.

Decontamination/Cleaning:Decontaminate and wash the floor with: Sodium hydroxide (2 to 5%). Wash off with

plenty of water.

Disposal: Treat recovered material as described in the section “Disposal considerations”.

6.4  Additional advice

no data available

SECTION 7: Handling and storag

7.1 Advice on safe handling

Electrical bonding of pneumatic conveyor. Earth the equipment. Blanket with inert gas.

7.2 Advice on protection against fire and explosion

Protect from moisture. Avoid dust formation. Avoid contact with water. Provide adequate ventilation.

7.3 Requirements for storage areas and containers

Recommended:Protect against light. Keep away from open flames, hot surfaces and sources of ignition. Keep

container tightly closed and dry.

Incompatible products: alkalis and caustic products. Oxidizing materials.

Packaging: Store in original container. Flexible container lined with a plastic film. Paper bag lined with a plastic

film.

7.4 Advice on common storage

Recommended: Stainless steel. Plastic materials (polyethylene, polypropylene).

Not suitable: Certain plastic materials. Steel.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational Exposure limit values

Contains no substances with occupational exposure limit values.

Biological limit values

no data available

8.2 Appropriate engineering

Avoid splashes. Maintain air concentrations below occupational exposure standards. Extract at emission point.

8.3 Personal protective equipment

Respiratory protection:

In case of dust or aerosol formation use respirator with an approved filter.

Hand protection

The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN

374 derived from it. Please observe the instructions regarding permeability and breakthrough time which are

provided by the supplier of the gloves. Also, takes into consideration the specific local conditions under which the

product is used, such as the danger of cuts, abrasion, and the contact time. Gloves must be inspected prior to

use.

Eye/face protection

Safety glasses. In case of contact through splashing: wear face-shield and protective suit.Skin and body protection

Protective equipment must be chosen according to the amount and concentration of the dangerous substance at

the workplace. Remove and wash contaminated clothing.

Hygiene measures

Emergency equipment immediately accessible, with instructions for use. Ensure that eyewash stations and safety

showers are close to the workstation location. Use clean, well-maintained personal protective equipment. Store

personal protective equipment in a clean location away from the work area. Shower or bathe at the end of working.

Regular cleaning of equipment, work area and clothing. When using do not eat, drink or smoke. Contaminated

work clothing should not be allowed out of the workplace. Wash hands before breaks, immediately after handling

the product and at the end of the day.

Protective measures

Protective equipment must be chosen according to current CEN standards and in cooperation with the supplier of

protective equipment. Selection of personal protective equipment should be based on an evaluation of the

performance characteristics of the protective equipment relative to the task(s) to be performed, conditions present,

duration of use, and the hazards and/or potential risks during use.